CJ19 series switching condenser contactor (hereinafter referred to as contactor) is mainly used in power lines with AC 50Hz (or 60Hz) and rated working voltage up to 400V, for low-voltage reactive power compensation equipment to put into operation or cut off low-voltage parallel capacitors. The contactor is equipped with a surge suppression device, which can effectively reduce the impact of the closing surge on the capacitor and suppress the overvoltage during disconnection.

CJX2 series AC contactors (hereinafter referred to as contactors) are mainly used in circuits with AC 50Hz or 60Hz, voltage up to 690V, rated working current up to 95A under AC-3, 400 (380)V use categories, for remote connection and disconnection of circuits, frequent starting and control of AC motors, and can be used with appropriate thermal relays to form electromagnetic starters to protect circuits that may be overloaded. Compliance: GB/T14048.4, IEC 60947-4-1.

CJX2 series AC contactors (hereinafter referred to as contactors) are mainly used in circuits with AC 50Hz or 60Hz, voltage up to 690V, rated working current up to 95A under AC-3, 400 (380)V use categories, for remote connection and disconnection of circuits, frequent starting and control of AC motors, and can be used with appropriate thermal relays to form electromagnetic starters to protect circuits that may be overloaded. Compliance: GB/T14048.4, IEC 60947-4-1.

CJX2 series AC contactors (hereinafter referred to as contactors) are mainly used in circuits with AC 50Hz or 60Hz, voltage up to 690V, rated working current up to 95A under AC-3, 400 (380)V use categories, for remote connection and disconnection of circuits, frequent starting and control of AC motors, and can be used with appropriate thermal relays to form electromagnetic starters to protect circuits that may be overloaded. Compliance: GB/T14048.4, IEC 60947-4-1.