Model: NL16-11P Size：φ16mm Color: R, G, Y, B, W, K Switch rating: 3A/250VAC Contact Structure: 1NO 1NC Operation type: Momentary/Latching Housing Material: Stainless Protection class: IP67, IK10
Model: LAK39C-11 Transient Size：φ22mm Color: Red, Green, Yellow, Blue, White, Black Switch combination: NO+NC Protection level: IP40
Model: ADK16-22DS Indicator Size: φ22mm Color: Red, Green, Yellow, White, Blue Shell material: Environmentally friendly nylon material Protection level: IP45 Voltage specification: ACDC6V/12V/24V/36V/48V/110V/220V/380V
NALD series T1 surge protector has high lightning discharge capacity, single. The maximum shock current of the module can reach 50 kA (10 / 350 μ s), which can prevent direct lightning strikes. The power supply of the equipment system in areas with higher risk of lightning strike. Stage surge protection, which can be combined in single-phase / three-phase power supply lines. High efficiency 1 energy saving 1 precision 1 low carbon.
BH-0.66 series current transformers are suitable for current, electric energy measurement or relay protection in AC lines with rated frequency of 50Hz, rated voltage of 0.66kV and below. The product is a molded case current transformer, which is widely used in complete cabinets. Its installation method can adopt busbar fixing and bottom plate fixing installation methods. It is suitable for installation in any direction. The primary conductor can be a busbar or a cable.
CJ19 series switching condenser contactor (hereinafter referred to as contactor) is mainly used in power lines with AC 50Hz (or 60Hz) and rated working voltage up to 400V, for low-voltage reactive power compensation equipment to put into operation or cut off low-voltage parallel capacitors. The contactor is equipped with a surge suppression device, which can effectively reduce the impact of the closing surge on the capacitor and suppress the overvoltage during disconnection.
